Stainless Steel Seamless Pipe
ASR MET Tech is a leading Indian manufacturer, supplier and exporter of premium stainless steel seamless pipes, made to ASTM, EN and DIN standards. We are ISO 9001:2015 certified, offering ASTM A312 pipes and exporting to more than 20 countries.
Stainless Steel Seamless Pipes Manufacturer In India
ASR MET Tech is a leading manufacturer, supplier, and exporter of premium-quality stainless steel seamless pipes. They are manufactured to ASTM, EN, and DIN standards, and are supplied to core industries such as pharmaceutical, power generation, oil & gas and other process industries on a global scale.
ISO 9001: 2015 Certified
ASTM A312
Exported to 20+ Countries
What are stainless steel seamless pipe?
Stainless steel seamless pipes are made by pushing or pulling a solid metal block through a shaping tool known as a die until it becomes a pipe with no joint or weld line on it. At ASR MET Tech, the pipe is made from one solid piece; it’s stronger, can handle higher pressure, and resists rust and corrosion better than pipes that are welded together.
That’s why our seamless pipes are one of the most preferred choices for tough industrial jobs. Our seamless pipes are made through several rounds of cold drawing, with heating steps in between to keep the metal soft and workable. Once the final shaping is done, the pipes go through heat treatment and surface finishing. Every pipe is inspected individually, measured for accuracy, and tested using non-destructive methods before it’s shipped out for delivery.
Seamless construction with consistent wall thickness along the entire length.
Higher pressure ratings compared to welded alternatives.
Enhanced corrosion resistance for aggressive environments.
Precise dimensional tolerances on OD, ID and wall thickness.
Superior surface finish, with pickled and passivated.
Complete traceability from heat number to material test certificate.
- Technical Data
Dimensional Specifications
Our seamless pipes come in many standard sizes; if your project demands non-standard or special sizes, we can customise it as per your specific design or requirements.
| Parameter | Range / Detail | Standard Reference |
|---|---|---|
| Outer Diameter | 10.30 - 323.90 mm | ASTM A312 / A268 · ASME SA312 / SA268 / SA790 · EN 10216-5 TC1 / TC2 · EN 10297-2 |
| Wall Thickness | SCH 5S – 160S 5S · 10S · 20S · 40S · 80S · 160S | ASTM A312 / A268 · ASME SA312 / SA268 / SA790 · EN 10216-5 TC1 / TC2 · EN 10297-2 |
| Length | Random (4–7 m) / Fixed | Per order specification |
| Surface Finish | Pickled & Passivated (P&P) | Per order specification |
| End Finish | Plain ends / Bevelled | Per order specification |
| Packing | Wooden crates / PVC-capped | Per order specification |
Grades & Material Composition
ASR MET Tech is a leading seamless pipe manufacturing company, providing multiple grades based on the operating environment, temperature range, and corrosion requirements of your business.
SS 304 / 304L
A general-purpose steel with 18% chromium and 8% nickel, easy to shape and weld. The 304L version has less carbon, which helps resist corrosion better near weld areas.
SS 316/316L
This grade adds molybdenum (2-3%), which makes it much better at resisting pitting and corrosion caused by salt and chlorides. This material is one of the top choices for marine equipment, pharmaceuticals, and chemical plants.
SS 321H
Great for power plants and exhaust systems as it contains titanium that helps it perform well even at high temperatures (up to 900°C). It holds up well during welding without weakening.
SS 316Ti
One of the most commonly used in refineries and petrochemical plants, similar to 321 but uses niobium instead of titanium.
SS 309 / 310
These grades are commonly used in furnaces, kilns, and heat-treatment equipment, as they have high chromium and nickel content made for extreme heat ( up to 1150°C).
Duplex / Custom Grade 2205
These grades are available for tasks that need both high strength and strong corrosion resistance.
Applications of Seamless Pipe By Industry
Each industry has its unique needs, different grades, finishes, and testing standards. ASR offers certified seamless pipes for use in many demanding industries. We have a team of experts who will assist you in choosing the right specification for your project.

Oil & Gas
For harsh environments such as those of oil and gas, we make pipes from grades 316L or duplex steel; these pipes offer strong resistance to corrosion. Our pipes meet the ASTM A269 and A213 standards, benchmarks for quality and safety.

Pharmaceuticals
In the pharmaceutical industry, hygiene plays a crucial role; it's non-negotiable. That's why we use pipes made from 316L or 304L grade steel and give them a very smooth, polished surface finish, keeping roughness extremely low, Ra ≤ 0.4 microns. This prevents the buildup of bacteria and ensures cleanliness.

Power Generation
For power generation plants, we use pipes made from grade 321 or 347 steel; they are known for holding up well under prolonged high-temperature conditions. They meet ASTM A213 and ASME SA213 standards to ensure safety and reliability for power plant use.

Chemical Industry
The chemical industry uses our pipes for various applications such as reactors, carrying acids or other reactive chemicals, heat exchange bundles, etc. These substances are highly corrosive in nature, and only pipes made from tougher grades like 316L, 310S, or duplex steel can resist damage over time. These pipes follow the DIN 17458 and EN 10216-5 European standards for best performance and quality.

Heat Exchangers
Grades 304, 316L and 321 are commonly used in heat exchangers. This industry requires pipes with precise outer diameter (OD) control and that fit perfectly into pipe sheets.

Instrumentation
For instrumentation, we use Grades 304 and 316L with a bright annealed (BA) surface finish for smoothness and cleanliness.
Applicable International Standards
Every seamless pipe we manufacture is tested in accordance with the following international standards. Material test certificates (MTCs) are supplied with every shipment.
ASTM A312 / A268
ASME SA312 / SA268 / SA790
EN 10216-5 TC1 / TC2
EN 10297-2
- Why Choose Us?
ASR MET Tech Manufactures High-Quality Stainless Steel Seamless Pipes
If you wish to opt for an independent inspector to check your pipes before shipment, we accept it; in fact, we also work well with popular inspection agencies such as TUV.
For industries needing pipes in a specific size for your project or equipment, we also offer customisation to match your unique requirements.
We respond to quote requests within 24 hours, offering a fast response so you don’t have to wait, especially when you have quick deadlines.
For our international clients, export packing pipes are carefully packed for international shipping, placed in sturdy wooden crates, with ends capped in PVC to keep out dust and moisture, ensuring they arrive in top-notch condition.
We have experience shipping to countries around the world, and we understand the customs and import rules for regions like the EU, USA, and CGG.
- FAQs
Stainless Steel Seamless Pipes - FAQs
Are seamless and welded stainless steel pipes the same?
The short answer is no; both are different. Seamless pipes are made from one solid piece of metal with no weld joints, making their wall thickness more even and giving them better strength under pressure and resistance to wear over time. Welded pipes, on the other hand, are made by rolling a flat strip of metal into a pipe shape and welding the seam. Welded pipes are usually cheaper, and they work well for lower-pressure situations that are not very demanding.
What countries does ASR MET Tech export to?
We ship regularly to the USA, Germany, Italy, the Netherlands, UAE, Saudi Arabia, Oman, Qatar, Australia and countries across South-East Asia. All our export paperwork, packaging, and shipping methods follow the rules and requirements of each destination country. If you have specific requirements for your country, feel free to reach out, and we’ll guide you through it.
Can you supply seamless pipes in non-standard or custom sizes?
Yes, we can manufacture pipes in custom outer diameters, wall thicknesses, and lengths to match your exact project or equipment needs. Custom sizes usually require a minimum order quantity. Simply send us your drawing or specification sheet, and we’ll confirm whether it’s possible and provide a quote.
Do you provide Material Test Certificates (MTCs)?
Yes, every shipment comes with a standard EN 10204 3.1 certificate, which confirms the material meets required specifications. If you need extra assurance, we also offer EN 10204 3.2 certificates, which include verification by an independent inspection agency TÜV (this comes at an additional cost). We also keep complete records tracing each pipe back to the original raw material batch (called heat traceability).
What is the minimum order quantity (MOQ)?
Normally, we require a minimum order of 100 kg per grade and size. If you’re working on a larger project or need multiple sizes for OEM purposes, we can combine everything into one shipment. Just send us your full requirement list, and we’ll let you know the MOQ and how long it will take.
- Contact Us
Get a Quote Today
Corporate Office
B-210, Mondeal Square, Opp. Honest Restaurant, Nr. Prahaladnagar Garden, S.G. Highway, Ahmedabad – 380015, Gujarat, India
Factory & Operations
Survey No. 48, Ahmedabad–Bagodara Highway 8A, Opp. Super Gas, Nr. Mongal Mata Mandir, Kalyangadh – 382240, Ahmedabad, Gujarat, India